Vertical packaging machine with bucket conveyor can automatically complete all processes, including: manual feeding, metering, filling, sealing, cutting, counting, and bag forming. It can also print batch numbers according to customer requirements.

Operation and adjustment:

1. The requirements of operating this machine: Power and cleaned compressed air, put the shell of the machine safely to the ground, set up the total work pressure as 0.6 Mpa. Add lubricating oil to the lubrication points and cylinders (pure white lubricating oil is recommended for the cylinders).

2. Put the packing materials in the film scroll and fiix the shelter (the printed-page outward or the compound page inward). Penetrate the packing materials according to picture of the film's locus.

3. Press the electrical switch in the electricity operation board, the indicator light is turned on, then the machine begin in the state of awaiting an opportunity. Version indicator showed as follows:

4. According to the packing materials pass the temperature controller of the board to set up trial sealing temperature. Temperature controller setting method: press the setting button on the temperature controller until the PL window displays "50" and the SV window flashes, then press the setting button again.

5. Examine the situation of the packing materials, to see whether the packing materials is in the obverse side of the finished-form machine, if not, then you need to adjust from left, right, above and below; Or adjust the axle position of the packing materials in the film scroll, made the two-wheel pull the packing materials easily

  Vertical packaging machines with bucket conveyors are suitable for packaging jelly sachets, candies, dehydrated vegetables, nuts, dates, seasonings, hardwares, plastics, etc. Metering and feeding devices can be selected according to different products.

  Vertical packaging machines with bucket conveyors can produce different bags according to customer requirements, such as: pillow bags, gusset bags, etc. Devices can be added according to the customer's bag making requirements, such as (flat/toothed/shaped) cutters, easy-tear openings, and perforation devices.